SteveTrek - Browse Comments

Reply to Upgrade Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on December 28, 2006

Do the hacks for disabling encryption, enabling 30-sec skip, backdoors, and HMO/HME work for 6.3a or just 6.3b? Thanks

Reply to Problem with network/link on new install on April 7, 2006

BBQ said: Are they back yet? It might take up to a day or so for your locals to get back into the guide. After 24 hours, if they haven't come back, then we'll see...

Reply to Problem with network/link on new install on April 6, 2006

BBQ said: Steve, you should do a "Clear and delete" everything...then go back through the Guided Setup routine...see if your USB 2.0 ports work after this... Using InstantCake requires a "Clear and Delete" after it's...

Reply to Problem with network/link on new install on April 6, 2006

I just "successfully" completed creating a new Tivo drive with PtvNet62 and InstantCake62. However, the Netgear FA120 I purchased, does not seem to work (no lights on the LEDs). I'm 100% sure I chose the...

Reply to Trying to repair PTVUpgrade Drive...No such file or directory message on April 5, 2006

rmichael said: Success! I finally configured the CD-ROM and Tivo drives the way that InstantCake needed - CD on hdb (Primary Slave) and Tivo on hdc (Secondary Master). I had tried to just specify drive...

Reply to Official PTVnet Software CD Instructions and Discussion Thread on April 2, 2006

Yog-Sothoth said: I am experimenting on an old IBM 30GB drive to see if the process works. Is this 30 gb drive too small to create a Tivo A drive? The destination drive needs to...

Reply to Official PTVnet Software CD Instructions and Discussion Thread on April 2, 2006

I just purchased PTVnet62 and Instantcake62 for my DirecTivo - HDVR2. I tried connecting the harddrive to Secondary Master (jumpers correct) and the CDROM to Primary Slave (changed jumper too). This HP Celeron computer refuses...