barefooter - Browse Comments

44 Comments Found    1 2 Next »

Reply to The Slicer: Instructions and Release Notes on June 20, 2007

Ran the slicer upgrade using the -d parameter which pulled the slices from the DVRUpgrade server. Thanks guys it worked like a charm. Question, are the 6.3D slices out there as well ?

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on June 3, 2007

You won't lose your recordings if you have a hacked 3.1.5 image and just do a slicer upgrade.

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on March 19, 2007

Not quite sure what happened but I had posted that there was a possibility you needed to change the file attributes to executable if it wasn't already set as such. That post seems to have...

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on March 13, 2007

Be somewhat careful with 6.3x and TivoWebPlus. I know that I crashed my HR10 several times trying to restore my Season passes etc.

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on March 11, 2007

Yes to both question above. The same codes for 6.3b work with 6.3c. And yes you can use the same instructions for 6.3c as 6.3b

Reply to Diff between DVRUpgrade and IC2+PTVNet and 6.2a on March 5, 2007

Not that I know off. I got them on both my 4120s and that made a complete mess of things. Right now I am trying to get a copy of the slice now and not...

Reply to Diff between DVRUpgrade and IC2+PTVNet and 6.2a on March 5, 2007

Receiveing them isn't a problem. Letting the unit install them is. Suggest you slice upgrade using them. That way you have 6.2a and your good to go for DST. There is a new version of...

Reply to 6.2a lost Network access. on March 2, 2007

Pull the drive and rebuild it. From what I saw they pretty much wiped out all the files I needed to boot from the other partition. Assume your current bootpage is HDA3/4 set. You could...

Reply to 6.2a lost Network access. on March 1, 2007

OK it's official D*Tivo is pushing software out to the 6.2 machines. I have two Samsung 4120s and both have now been hit with a software upgrade that wiped out network access and all the...

Reply to 6.2a lost Network access. on March 1, 2007

It was late at night and that was the verison of softare I was running that died. Seems I got a forced don't ask how, software upgrade. Pulled the drive, re-ran the PTVNet only. That...

Reply to No Tivo in my Network. on February 26, 2007

Sorry forgot to subscribe to this thread. OK go to PTVupgrade.com or weaknees.com and just order a serial cable. that will help you get to your bash prompt and make your fixes. Then you need...

Reply to No Tivo in my Network. on February 25, 2007

Depends on a couple things. First, you need the back ported drivers for a USB200M. Then you need to modify the USB.MAP file. My guess is your HD kit is older than that. Do you...

Reply to D* pushing ver 6.3 to HR10-250 on February 3, 2007

Movie Loader is a program that runs on your PC that serves up video from your PC to your TiVo. It works ok. The runtime is available on Deal Database.

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on January 18, 2007

Videog, Got MFS_FTP working. The HR10s really don't like TyStudio.... You want to look on DD for a TMF2TY tool from there download TMF files. They are rock solid.

Reply to Upgrade Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on January 18, 2007

The 6.3 b slices are once again being sent down from DTV if you don't want to wait, You can find them here... on DD . The patches will work on 6.3,6.3a & 6.3b

Reply to Compatible USB-Ethernet Adapters for Series 2 DirecTiVos on January 16, 2007

Deleted found in a prio post how to get the USB200M V2 drivers working..

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on January 8, 2007

I got to where you are when I screwed up running the slicer. I <CRTRL-C> to copy and killed it. From what I can tell your only option is to blitz it and start over....

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on January 2, 2007

Just managed to get the slices. PM me for link. Pretty sure you are correct. From what I am reading on DD. There is also a whole lot of discussion on MFS_FTP not working with...

Reply to Update Your PTVnet-Networked HR10-250 to 6.3b Using the Slicer on January 2, 2007

Videog asks a real good question. It looks from what I can see as if the mothership isn't sending them down any more. Does anyone have more detailed instructions for getting them loaded onto a...

Reply to Upgrading a PTVnet-Networked HR10-250 (3.1.5f) to 6.3a Using the Slicer on December 8, 2006

Yog, Re my question, Can you tell me or does anyone else know what exactly happens durring the network section of the slicer. Given my run of the slicer nerver got there. (I killed it...

Reply to Upgrading a PTVnet-Networked HR10-250 (3.1.5f) to 6.3a Using the Slicer on December 6, 2006

OK under the category of shear stupidity.... Ran the slicer and got to the section right before you enter the Network IP address. The part where it says things like "IMPORTANT!! Please review the above...

Reply to Upgraded my RCA DVR40, but can't get the networking to work on August 6, 2006

OK not so newbie question. The Netgear FA120 is basically out of production and they aren't readily available. While I don't have any critsm of the process I had 2 FA120s. One got take out...

Reply to Tytool connects...but can't get list.... on October 9, 2005

Ok sorry but now the bad news... If you haven't used AlphaWolf's patch yet, all the files currently on your TIVO are scrambled. Follow the directions on the link I sent and you should be...

Reply to Tytool connects...but can't get list.... on October 8, 2005

Did you replace the nowshowing file with the one posted for 6.2 If not here is the one I got from Deal database to fix the problem Also, If you haven't turned off scrambling you...

Reply to Help with TyTools on January 5, 2006

Yeah it is you want tserver. Did you change the scramble code ? put out the NowShowing.tcl file and then try to connect from your computer ? If you don't have one of PTV's built...

Reply to Help with TyTools on January 5, 2006

Not exactly sure what you are having an issue with. If you unzip the archive from the link in the prior post it has all you need you just need to do a binary FTP...

Reply to Help with TyTools on October 1, 2005

Not sure where you heard that. TyTool9r18 works perfectly with series 2 machines and Dtivo 6.2. You can grab it here.... http://www.dealdatabase.com/forum/showthread.php?t=39740 As my post said my only problem is DTV sent me a new...

Reply to Help with TyTools on October 1, 2005

Exactly what JDLiner told me on dealdatabase. Thank You... I have been pulling my hair out on this one. Now for the bad news... I had dones this right after first building my 6.2 disks...

Reply to Help with TyTools on September 29, 2005

Appreciate your comments... This is clearly a problem between Ty studio and the way the files come down. I have been using this product since I purchased my first drive from you. Back in the...

Reply to Help with TyTools on September 29, 2005

Having the exact same problem. I have tyserver running on my Tivo and when I go to either make mpegs or download as mpeg I get the exact same error message you do. Sound like...

1 2 Next »