stivovance - Browse Comments

356 Comments Found    1 2 3 4 … 12 Next »

Reply to Email Keeps Bouncing Back on February 28, 2007

Not sure what email you are sending to, but the proper way to contact us is through our helpdesk or using the contact form . please make sure dvrupgrade.com is allowed through your spam filter....

Reply to Series 3 upgrade available? on February 28, 2007

Crazy Dave said: stivovance said: There's only a CD version. 2 & 3 No hacking at all. Yes, you need a Sata converter, which we sell as well. Just look on the accessories page when...

Reply to Newbie here: Question about Upgrading software on philips S2 on February 22, 2007

Sorry, can't help with the slicer, haven't used it yet. And again, not sure how it work either as I think (again haven't used it) it's only for regular systems that have the correct software...

Reply to How to Recover DTV "Lost Locals" after Upgrade on February 22, 2007

It's more like 24 hours or less to wait, so for some, it's not a big deal. When you call directv, it's automated the first attempt. You put in the 3 digit code that is...

Reply to Newbie here: Question about Upgrading software on philips S2 on February 21, 2007

4.01 was never meant for this unit, that is why. The series2 directivos went from 3.11 to 6.2. 4.01 was for standalones only. Chances are your unit will not upgrade to anything as the software...

Reply to Help with DVRupgrade Capacity and TurboNet Kit install on February 19, 2007

21, 23 and 80

Reply to Philips DSR 704 and 708 on February 19, 2007

Nope

Reply to HR10-250 w/3.1.5f and DST change on February 18, 2007

In short: No one knows. We expect that the recordings will work but the guide will be an hour off. If you have manual recordings, those won't record the correct program. I've also read that...

Reply to Now Showing Empty List on February 17, 2007

Have you enabled MRV or HMO? Or are you still using a stock PTVnet and Cake build? If you are using stock, no idea why this would be happening. I'd reboot the unit and see...

Reply to Upgrade worked... sorta on February 16, 2007

Manufacturer diagnostics. Go to their site and run diags on the drive. It sounds like a bad drive to me. If the power supply is making a high pitch whine, that could also be the...

Reply to Upgrade worked... sorta on February 15, 2007

Either your hard drive isn't the problem, your unit is or more likely the drive isn't good. Run diags, including low level on it and find out if it's 100% good or not, then start...

Reply to Help with DVRupgrade Capacity and TurboNet Kit install on February 15, 2007

It sounds like you have it physically connected properlly. Now, I'd start investigating your router to make sure you don't have any ports blocked. Instead of going through guided setup, once it boots up, just...

Reply to unable to run ptvnet downloaded from web on February 15, 2007

It's not the download as it's zipped. If you are able to unzip it, then the problem is either an incompatibility with your pc or more likely media and burning speed. Try a slower burn...

Reply to Is my TiVo dead? on February 15, 2007

It could be: motherboard either or both drives power supply is failing and not cranking enough juice to get both drives going. I'd open the unit and fully test, including low level both of the...

Reply to Wireless TRENDnet, etc. on February 14, 2007

If you have the ethernet converter not hooked up to anything, you still should be able to see it on your network, otherwise it sounds like you don't have the adapter set correctly for your...

Reply to Really Confused about USB200M on February 14, 2007

As we state when you purchase these, that is the risk you are taking on that they may not work in every pc out there. So it seems the software is the problem but rather...

Reply to Drives Test Fine, but Stuck on Powering Up ? on February 14, 2007

Could be the unit. When it is stuck on Welcome, powering up or in reboot loop as it's called, the unit isn't reading the drives.

Reply to Really Confused about USB200M on February 14, 2007

I have no idea on the serial stuff. I know that serial connections are already enabled with PTVnet, all you had to do was plug up the cable to the tivo and start a serial...

Reply to very slow tivo menus on February 13, 2007

Glad you got it working! Yes, while all the cool hacks/enhancements work, the poor machines only have so much horsepower and doing all the extra stuff, while normally is fine, it's quite labor instensive on...

Reply to Help with DVRupgrade Capacity and TurboNet Kit install on February 13, 2007

Are you getting a link light on the card? Another thing you can try, take an eraser just a standard #2 pencil will do and gently erase the connectors on the motherboard. Or you can...

Reply to Really Confused about USB200M on February 13, 2007

Have you booted the PTVnet cd first and then put in the cake cd when asked? the USB200m is a USB 2.0 device, so usb 2.0 driver is the one needed. How do you have...

Reply to series 2 dtivo stuck at welcome powering up, SOLVED on February 13, 2007

uhhh, no. A single drive does not require more power than the power supply should output. If your system can't handle it, then you have a faulty power supply. It even has enough power to...

Reply to very slow tivo menus on February 12, 2007

1 of 2 things. If you've just powered on the unit, or during the first few hours, it's quite busy gathering all the guide data and indexing it. Give it some time before you hammer...

Reply to Help with DVRupgrade Capacity and TurboNet Kit install on February 12, 2007

Do you have a series1 standalone or a Directivo? If you have a standalone, make sure you removed the leg under where the turbonet card goes on. Also, ensure that ,#401 is in the dialing...

Reply to Used Instantcake - but networking is gone? on February 11, 2007

No, it's all set for making the daily call, just enter in ,#401 in the dialing prefix and it has ftp enabled. You have the Netready software package. To unlock it to have telnet and...

Reply to Used Instantcake - but networking is gone? on February 11, 2007

As far as I know, no, Instantcake only has turbonet and cachecard drivers.

Reply to Used Instantcake - but networking is gone? on February 11, 2007

Yes, it will allow you to use either the Turbonet Or the Cachecard to make daily calls, and speed up the menus if you are using the Cachecard. Any other networking, tivoweb and telnet will...

Reply to Used Instantcake - but networking is gone? on February 11, 2007

Put ,#401 in the dialing prefix and you can use a turbonet or cachecard to make your daily call.

Reply to Does my situation require "Repeat Guided Setup?" on February 11, 2007

If you are copying your content from one drive to another, then no, repeating guided setup isn't necessary. You may or may not be able to make the copy happen as it sounds like you've...

Reply to PTVnet 6.2 1.1/Linksys USB200M Version 2 on February 11, 2007

If it says 2.1 instead of 1 or 2 then it's quite possible that they changed the chipset in it and it will not work.

1 2 3 4 … 12 Next »