Previous Thread
All of the geniouses in this room and not one answer? Cmon
I have a HDVR2 & HR10-250 setup to be reachable from work. I can connect to the HDVR2 at all times. The HR10-250 I can connect to sometimes. Sometimes I get "The page cannot be displayed", and sometimes I get right in to the unit. Any idea's why this could be intermmitent? When I cannot connect to the HR10-250 I can still connect to the HDVR2 so it is not a downed network.
September 18, 2006 9:03 AM
How do you have the intermittently showing tivo's port forwarded?
Now three Sammys (2 S4120R & 1 S4080R) upgraded with a little help from our friends at PTVupgrade, then Superpatched for MRV & HMO.
Remember: Search is your friend.
Don't forget to watch a little television now and then guys!
September 18, 2006 9:05 AM
It works sometimes and sometimes not remotely. The router setting never change.
September 18, 2006 10:46 AM
Let me ask the question another way--->
Describe, in detail, the port forwarding steps that you have taken in order to access your two tivos from the www.
Now three Sammys (2 S4120R & 1 S4080R) upgraded with a little help from our friends at PTVupgrade, then Superpatched for MRV & HMO.
Remember: Search is your friend.
Don't forget to watch a little television now and then guys!
September 18, 2006 10:48 AM
Would it matter if it connects sometimes? Isn't it one of those if it works it would always work if there were no changes made to the router?
I forwarded 80 to 8888 and my DVR is port 8888
Is that what u r asking?
September 18, 2006 11:49 AM
I'm just trying to suggest that you may have a conflict which allows a "confused" router to see it sometimes, and other times not. Didn't you say that you have two dvrs? Have you eliminated all potential variables / conflicts in the system to see if you can isolate the issue?
Now three Sammys (2 S4120R & 1 S4080R) upgraded with a little help from our friends at PTVupgrade, then Superpatched for MRV & HMO.
Remember: Search is your friend.
Don't forget to watch a little television now and then guys!
September 18, 2006 12:00 PM
Yup. 2 DVRS and the other one NEVER loses it connectivaty remotely.
I appreciate you help on this, no one else has bothered.
September 18, 2006 12:06 PM
But again, you are NOT forwarding the same port for both dvrs, right?
Now three Sammys (2 S4120R & 1 S4080R) upgraded with a little help from our friends at PTVupgrade, then Superpatched for MRV & HMO.
Remember: Search is your friend.
Don't forget to watch a little television now and then guys!
September 18, 2006 12:12 PM
Right.
The HR10-250 Port = 8888
The HDVR2 Port = 8820
Rebooting the HR10-250 fixes this problem every time.
September 18, 2006 12:18 PM
Have you tried another port? One that is inside of the range, like the one that works consistently?
Now three Sammys (2 S4120R & 1 S4080R) upgraded with a little help from our friends at PTVupgrade, then Superpatched for MRV & HMO.
Remember: Search is your friend.
Don't forget to watch a little television now and then guys!
September 18, 2006 12:19 PM
I could try that. Once again I appreciate your help. I will change the port tonight.
Add Your Reply
Sponsored Links
Copyright © 2013
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
My Open Router |
DijitCommunity |
Robo Community |
Sansa Community |
TechLore |
TiVo Community
Also, I can connect to TWP everytime when I go home and connect locally.
Any ideas?