Updated with correct USB adapter models !!! Please tell me if these are supported or where I can find the latest list of supported USB adapters.  ================================

I rebuilt my 2 120GB Quantum drives with IntantCake after problem with power supply and Tivo came back to lilfe.

I used a PC power supply to power the drives and left original power supply in place.  Rebuilt drives which came up without a problem.  Then purchased the PTVnet and run on the same drives, selected the USB 2.0 option and then tried to connect but no luck.

I used a Belkin model FSD7050 Wireless G USB Network Adapter and a Linksys model WUSB54GV2  Wireless-g Network Adapter but no luck.

I removed WEP encryption from the wireless setup on the router, added MAC address to router, then I tried adding a static reservation address for each MAC address of the 2 USB G wireless devices but nothing.  I even tried plugging both USB devices at the same time, but nothing.  I rebooted after each attempt.

Tivo is behaving as if there is not network USB support.

Can you help me identify if my 6.2 software sees the USB port?

I remember reading a long time ago about a phone line setup with a "#,104" or something like that to force it to make the call on IP.

My config on the PC was CD Rom on primary bus and 2 drives on secondary bus Master and Slave hdc and hdd.

Any help you can give me would be appreciated.

oh capacity says "Variable, up to 231 Hours"

Thanks.