Categories: DVRupgrade Support Area
Got an easy one. I have an HR10-250 that i used PTVnet and InstantCake on originally to set up. It's been running fine with 3.1.5f version software. I recently upgraded the software to 6.3a, and after some trials and tribulations, got everything working again. However, one file i lost along the way was the /.profile file from my original install. I think there's some things in there i want to keep. Would someone please reply with their original (or slightly modified) /.profile file? I can modify the paths etc to match what i really have. I just want to get exported variables that i'm supposed to have, and the hand jim-dandy aliases that were in there.
Sorry if this is a repeat question, but i couldn't find the answer elsewhere.
Thanks, Mike
Let me know if you need a writeup on how to do the 6.3a upgrade.If you did it without using the Slicer, post it in the Networking forum (there's one on how to do it with the Slicer there now).
TechLore Blog
HR10-250, Samsung SIR-S4120R, SIR-S4080R, 2 Philips DSR704s (one connected to a Slingbox A/V). One box used the "Zipper"; rest used PTVnet to enable networking features.
Ok, I posted it. It's pretty long. I wrote it intending it to be a downloadable file that folks could use for reference. It has 3 other guides in there that i collected while doing the upgrade.
Mike
PS: Can anyone post their .profile file? I'm looking for one from someone who has done InstantCake and PTVnet. I forgot to back mine up before the upgrade, and it's gone now. Thanks.
Copyright © 2010
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
MediaSmart Home |
MotoDash |
My DigitalEntertainer |
My Open Router |
Pogoplugged |
Robo Community |
Sansa Community |
Sling Community |
TechLore |
TiVo Community |
TouchSmartDevZone
Did you forget your password?
You can also log in using OpenID.
Previous Thread
