Elseed problem: DVRplayground

Pending Member

member since: 07/16/2005
rank: 6802 of 8325
3 comments

July 16, 2005 1:01 PM

Same problem...

g-ace said:

Installed PTVnet utilities 6.2 for series 2, everything works perfect. Started Elseed manually through HackMan, call comes in and caller id flashes up on the screen however it doesn't clear itself afterwards any ideas?

I seem to have the same problem. Also noticed that when I enabled elseed, after a call came in, the CallerID display and the play bar looked duplicated.

HDVR2 v6.2 Software, used PTVNet upgrade disk.
Bob

PsyPro

Member

member since: 07/16/2005
rank: 6805 of 8325
3 comments

July 16, 2005 4:12 PM

I have a similar issue with both elseed and Yac. Both want to post a blurred (doubled) image in the bottom right hand corner, instead of the way my old series 1 did... across the top in bigger letters.

Once it posts, it will not wipe until another action happens. I think this is an OSD library issue, but I'm not technical enough to figure it out.

dmark1867

Pending Member

member since: 07/05/2005
rank: 264 of 8325
3 forum threads started
14 comments

July 20, 2005 9:15 AM

I have been having the same problem with elseed. I have a phillips dsr704 with instantcake 6.2

The display was small, had double images and would not clear.

Here is what I did to resolve this:

I could not have done figured this out without these link:
http://www.dealdatabase.com/forum/showthread.php?t=34159&page=3&pp=15

This is there work not mine!

---------------------------------------------------------

Here is what worked for me.

I created several directories
mkdir /var/hack/
mkdir /var/hack/home
mkdir /var/hack/lib
mkdir /var/hack/bin

I then copied over the modified files via ftp in binary mode

You can Download the files from here:
http://webpages.charter.net/mazes/other/elseed.zip

I then did chmod 755 to all of the directores
chmod 755 /var/hack/*
chmod 755 /var/hack/home/*
chmod 755 /var/hack/lib/*
chmod 755 /var/hack/bin/*

Then I modified the /etc/rc.d/rc.sysinit.author file

Look for the line: # An extra library directory needed for yac and elseed

It now looks like this:
# An extra library directory needed for yac and elseed
export LD_LIBRARY_PATH=/var/hack/lib
cd /var/hack/bin
/var/hack/bin/elseed -t 10 -b 0xFF000000 -f 0xFFFFFFFF &

Save the file and reboot, this worked for me.

g-ace

Pending Member

member since: 11/17/2004
rank: 105 of 8325
3 forum threads started
7 comments

July 20, 2005 3:19 PM

I think that's great demak1867 that you've found a solution. I will certainly install it if the PTVupgarde people can confirm that this is a problem since it seems that there are others with this issue, and that this is the correct solution.

PsyPro

Member

member since: 07/16/2005
rank: 6805 of 8325
3 comments

July 20, 2005 10:56 PM

That's great, but after looking at both, I'm leaning towards YAC... it'll give me the Caller ID here at the computer and the tv.

Can I use it after making all those adjustments?

Thanks!

dmark1867

Pending Member

member since: 07/05/2005
rank: 264 of 8325
3 forum threads started
14 comments

July 21, 2005 7:54 AM

That should work

What I am doing is using YAC as a listener on my pc and I have added a elseed.conf file to /etc/ and in the file it has:

YacClient 192.168.1.100:10629

richsew

Pending Member

member since: 04/25/2005
rank: 7073 of 8325
2 comments

July 21, 2005 2:01 PM

Help

Applied your fix demak1867 but elseed doesn't start unless I start it in Hackman and then I have same problem any other ideas?

dmark1867

Pending Member

member since: 07/05/2005
rank: 264 of 8325
3 forum threads started
14 comments

July 21, 2005 3:25 PM

Not sure what you did wrong, it is working perfectly for me. You might want to add sleep 200 in a line above it in your /etc/rc.d/rc.sysinit.author file

To have it start automatically you have to modify your /etc/rc.d/rc.sysinit.author file

PsyPro

Member

member since: 07/16/2005
rank: 6805 of 8325
3 comments

July 21, 2005 5:02 PM

I'll look at using elseed with the listener. Thanks for all the help!

g-ace

Pending Member

member since: 11/17/2004
rank: 105 of 8325
3 forum threads started
7 comments

July 21, 2005 6:46 PM

The 'var/hack' directory already exists on my machine and that's where I but 'tserver 'however for some reason I cannot create the '/home', '/lib', and '/bin' directories, I get a syntax error command not recognized, any ideas?

g-ace

Pending Member

member since: 11/17/2004
rank: 105 of 8325
3 forum threads started
7 comments

July 22, 2005 11:59 AM

Ok I actually took a different approach then dmark1867. Rather then mkdir, (which I can't do for some reason, it maybe because the FTP that PTVUpgrade has installed needs to be replaced with an FTP that will recognize the command.) multiple directories and editing files this is what I did.

I downloaded and extracted the 'elseed.zip' that dmark1867 has listed above.

Then uploaded the contents of the 'bin' directory from the .zip file (minus the 'ws_ftp.log' file) to the '/ptvupgrade/bin' directory.

Then uploaded the contents of the 'lib' directory from the .zip file (minus the 'ws_ftp.log' file) to the '/ptvupgrade/lib' directory.

I ignored the 'home' directory in the .zip file.

Reboot Tivo

That's it.

It uses a larger font and color, (easier to read), and is located in the upper left instead of the lower right.

richsew

Pending Member

member since: 04/25/2005
rank: 7073 of 8325
2 comments

July 23, 2005 5:20 PM

Got It

demak1867 I finally had time to redo everything and now it works. THANKS :)

davemw

Member

member since: 08/31/2005
rank: 1344 of 8325
2 forum threads started
4 comments

September 1, 2005 8:06 PM

can you post that elseed.zip file again that link does not work and i cant find it anyware. one the elseed****.bz2 file

dmark1867

Pending Member

member since: 07/05/2005
rank: 264 of 8325
3 forum threads started
14 comments

September 2, 2005 6:07 PM

Elseed is buggy with 6.2 I am now using NCID and it is rock solid

See here for more info:
http://ncid.sourceforge.net/tivocid/tivocid.html

davemw

Member

member since: 08/31/2005
rank: 1344 of 8325
2 forum threads started
4 comments

September 3, 2005 11:00 AM

here is a working elseed just over right the one that ptv installs.

tivo4ever

Member

member since: 12/20/2005
rank: 197 of 8325
1 forum threads started
2 comments

January 2, 2006 6:39 PM

fwiw, I think the Elseed that ptvupgrade currently puts on 6.2 (DVR2) exhibits
all the problems mentioned in this thread. I found another thread on another forum that someone put an elseed out for 7.2.1 and I decided to try it.
It can be found here:

http://www.dealdatabase.com/forum/showthread.php?t=46089

It has a slightly different elseed.conf setup, but it works just like the
elseed did on a series 1. (nice and big on the top of the screen and goes away)

It would be nice if ptvupgrade distributed a usable elseed on the 6.2 instantcake CD.

Yog-Sothoth

Moderator

January 9, 2006 10:28 PM

here is a working elseed just over right the one that ptv installs.

That worked very well! I stopped elseed in Hackman, changed the filesystem to read/write (mount -o remount,rw /), copied over the new file to /ptvupgrade/bin using SmartFTP, and restarted elseed with Hackman. The called ID info is nicely displayed in the upper left and goes away when it should.

TechLore Blog

HR10-250, Samsung SIR-S4120R, SIR-S4080R, 2 Philips DSR704s (one connected to a Slingbox A/V). One box used the "Zipper"; rest used PTVnet to enable networking features.

tivonet

Pending Member

member since: 12/08/2005
rank: 522 of 8325
2 forum threads started
4 comments

January 20, 2006 8:44 AM

I have downloaded elseed to my desktop. How do I copy the file to the tivo directory /ptvypgrade/bin?

DVRplayground

Elseed problem

g-ace

Add Your Reply

Sponsored Links

Please log in or register to participate in this community!