I am getting a similar error msg.... when in the PTVnet utility, I'm asked to go ahead and swap the instantcake cd into the drive and press -y- to continue, which I do... then I get cd-rom not properly mounted...or something similar, but later I get "/cdrom/.images/000001: No such file or directory"

 Now one would think that, as mentioned above, my cdrom is not mounted as the primary slave properly, but the way that I have the jumpers set is the only way that I have been able to get it to boot the PTVnet disk upon primary boot up.  Also, I noticed that the subdirectory mentioned above is actually named "_images" instead of ".images" as the PTVnet utility apparently looks for....I don't believe a subdirectory can actually have a period in the name.

 Can anyone help with these two issues?  CdRom not mounted properly, and Instantcake subdirectory named "_images" instead of ".images"   ?

Thanks 

Now three Sammys (2 S4120R & 1 S4080R) upgraded with a little help from our friends at PTVupgrade, then Superpatched for MRV & HMO.

Remember: Search is your friend.

Don't forget to watch a little television now and then guys!

pstgh said: I am getting a similar error msg.... when in the PTVnet utility, I'm asked to go ahead and swap the instantcake cd into the drive and press -y- to continue, which I do... then I get cd-rom not properly mounted...or something similar, but later I get "/cdrom/.images/000001: No such file or directory" Now one would think that, as mentioned above, my cdrom is not mounted as the primary slave properly, but the way that I have the jumpers set is the only way that I have been able to get it to boot the PTVnet disk upon primary boot up. Also, I noticed that the subdirectory mentioned above is actually named "_images" instead of ".images" as the PTVnet utility apparently looks for....I don't believe a subdirectory can actually have a period in the name. Can anyone help with these two issues? CdRom not mounted properly, and Instantcake subdirectory named "_images" instead of ".images" ? Thanks

I'm having EXACTLY the same problem with getting InstantCake Special Edition ("ISE") to configure my 2 Seagate 250GB hard drives ONLY when running PTVnetHD first and inserting the ISE CD.  When I ONLY run ISE by itself on these 2 drives, PTVnetHD works PERFECTLY.  Also, when I ran PTVnetHD on ONE of these "raw" drives when it first came out of the box, it worked perfectly.

I would REALLY appreciate your help on this problem ASAP so I can get my HR10-250 working properly and get some value for the $39.98 I paid for these two download.

COMPUTER:

- Dell PowerEdge 400SC Pentium 1.5GB RAM

- Seagate Barracuda ATD 250GB HDs (ST3250623A)

- NEC CD/DVD drives onSECONDARY IDE cable (booting off of SLAVE CD drive and will NOT boot unless BOTH CD/DVD drives are connected